C-AJJ4004 New road-use front anti-roll bar

This bar has been developed to complement those road cars fitted with post 1990 rubber springs. Being the softest compound yet used on the Mini in an attempt to improve comfort, they allow more body-roll. This bar will not only reduce body-roll, but also slightly reduce dive under braking and squat under acceleration. The bar is aimed at the general daily driver. For more progressive drivers it is highly recommended that its used in conjunction with rear anti-roll bar kit C-AJJ4009. By testing various settings its possible to attain a very well balanced fast road car with improved steering response to compliment the other advantages of these bars. It is made to only fit the standard diameter/dimensioned tie-rods.

SUSPENSION - Basic set-up method

Time to arrange all those agonised over, carefully selected and applied suspension components to give of their best.

Suspension - Basic set-up method

part numbers: TOOL10, TOOL11, HILO, HILO-01

Time to arrange all those agonised over, carefully selected and applied suspension components to give of their best.

This is one of those subjects viewed as a ‘black art’, largely because of lack of understanding and confusion. The confusion part is because folk encompass the whole suspension set-up deal with suspension arrangement and design, lack of understanding instilling terror at the thought of ‘fiddling’ with the suspension components. The latter also fuelled by the knowledge that expensive specialist measuring equipment is needed. Well, there is no black art – you can work the magic. More a case of a long day...

SUSPENSION - Terminology

Glossary of terms used in the suspension on the mini. The Mini has consistently more than proven its capability in competition with very limited and cost-effective modifications based on the standard equipment fitted. Having first ensured the bodyshell (in reality little more than a complex bracket to hold suspension and driver securely in place) is well sorted out by removing all cruddy or rotten metalwork and into something like straight, square and strong we, maximising suspension stability and geometry pays dividends in the enjoyment that is driving a Mini. Understanding what the individual ingredients are helps in pursuing what you want from the experience. Smooth Mover Good, reliable, and consistent handling is dependent on a number of factors. At this stage, we’re concerned with clapped out or badly adjusted suspension components. Stiff, seized, partially seized or slack, sloppy, worn out suspension components will cause inconsistent, wayward, confusing and – more important

SUSPENSION - Basic Priorities

Suspension - Basic priorities for improved suspension performance. Having studied the 'Suspension - Terminology' article you should now have a ‘job description’ understanding of previously possibly un-comprehended words associated with suspension control. Now - what to do with it? The first thing we need to establish is an order of priority before distributing hard-earned 'beer vouchers' in all directions. Fortunately, this is a good deal less complicated than is generally believed. Despite the five main factors that control the front suspension geometry – kingpin inclination, caster angle, camber angle, track, and bump-steer – we are only really able to alter three of those easily. King-pin inclination is non-adjustable, as it’s a feature of where the swivel-pins are mounted on the hub at the factory. It will alter as other adjustments are made, but we can do nothing easily about correcting/optimising it independently, as these are fixed in position on the swivel hub.

Brakes - Fitting Discs and Required Ancillaries

What you actually need for the disc/drum conversion is pretty straightforward. Disconnect the steering arms, top and bottom swivel-pins, CV joint, and flexible brake pipes at the subframe - that’s it. There are, however, a number of ancillaries to consider.

Basics

Basics Fitting discs designed for the Mini is easy enough. Just make sure you use CV gaiters for the disc-brake set-up - these have a different bellows shape to stop the gaiter rubbing the inside of the hub. The drum type will rub, then split, shedding grease all over the place. Moly grease is mighty mucky stuff to deal with and doesn't assist braking at all! A tip for racers - to stop the gaiters over-expanding when getting very hot and imitating the aforementioned, put either a decent sized split pin or (my favorite) a piece of very small bore pipe - as in the type supplied with WD40 aerosols, etc. - under the retaining strap on the drive shaft. This allows air to escape and return,

SUSPENSION GEOMETRY - Buy the right parts to do the job correctly

It is baffling to see so many companies advertising mini suspension geometry parts in kits that are a waste of time as they rarely complete the job on either the front or the rear.

Engine transplants - Ancillary parts

Engine mountings are a whizz to fit as the Mini ones fit straight onto any of the other units. Just remove the Metro/AA/1300GT ones and swop the mounts over from the Mini unit. If they’re split, fit new ones, they’re cheap.

Terminology -
BBU - Big Bore Unit
SBU - Small Bore Unit

NOTE: This information covers transplanting large-bore engine units into small-bore engined Minis. For further information for exact differences between pre-A+ and A+ units, see relevant separate article.

Engine mountings and steady bars.
Engine mountings are a whizz to fit as the Mini ones fit straight onto any of the other units. Just remove the Metro/AA/1300GT ones and swop the mounts over from the Mini unit. If they’re split, fit new ones, they’re cheap. If using the AA/1300GT unit - it's advisable to cut off the 'wings' on the front plate that carried the engine mounts on the radiator end.

Exhausts - RC40, Millennium and others tested

The recent rolling road re-test of the 1275 engine build I did saw an opportunity to do some exhaust systems testing.

I had noticed a few years back that the RC40 was being manufactured by a different process than the originals - giving rise to a change in the shape of the bends applied to the system. I had wondered if they would be causing a restriction at all - but hadn't had the opportunity to test it. The lack of expected power from the aforementioned engine lead me to investigate all possible angles from the tyre contact patch to the carb mouth. I found nothing that explained the 14 or so bhp I was 'missing'. After some application of the old grey cells I mentally narrowed cause down to one of two things - either the piston oil control rings were still causing excessive drag (75% of all internal friction of an engine is generated by the piston rings) or perhaps these new bends in the venerable RC40 were indeed causing a power loss.

KNOW YOUR MINI TYPE

This is to help you understand which mini you own from a spare parts point of view. Officially There were only Mk1/Mk2 and Mk3 on sales brochures but the Mk4 was introduced by Keith Dodd in 1976 to help people understand the main parts changes. From here we eventually got to MK7

What mini do you own-Make your Mark from this list Confused what mini you own,...

Lubrication - Oil, what it does and how

It's criminal. Folk spend fortunes putting together super-sonic motors, only to skimp on the oil they use. Why? Oil's oil right? Wrong. Even if it's a standard engine, it deserves TLC considering it's extremely hostile working environment.

Oil is literally the engine's life-blood. The opening few sentences are astonishingly true. Oil isn't there just to prevent all metal components within an engine fusing together in the first few seconds of running, creating a total melt down of Chernobyl proportions. It's an intricate blending of chemicals to protect the engine as a whole.

The most commonly uttered statement about engine wear is most wear occurs within the first 10 minutes from start up when cold. True if cheap chip fat oil is used.In performance and race engines, a considerable amount of wear is created by heat, load, speed, and pressure. Again, cheapy oil won't give protection here.

Lubrication - Temperature critical

The correct running temperature of the oil is perhaps even more important than the water/coolant temperatures - so let us consider how to control them.

Mainly because it seems to be the most misunderstood of the whole process, and oil cooler fitment almost a reflex when over-heating occurs where a tuned engine of any type is concerned. And in many cases on standard production road cars for that matter.

Almost since the appearance of the immortal Cooper S, fitting an oil cooler has been the essential thing to do to any tuned Mini without any comprehension why. The original fitment was necessary because oil and bearing technology wasn't too advanced. Asking an oil of yester-year to cope with lubricating an engine at racing speeds, and a gearbox pushed their performance to the edge of their all too narrow capability, so extreme control over their working environment was essential for reliability. Hence oil cooler fitment.

Wheels & tyres - Bigger wheel fitment consideration

Predominantly 13-inchers, but 12s as well, the main thrust of the questions being 'what do I need to do?'

This subject is a regular visitor to the message board and 'Knowledge' section of Mini Magazine for whom I write - fitting bigger wheels. Predominantly 13-inchers, but 12s as well, the main thrust of the questions being 'what do I need to do?' along with 'which wheel arch extensions will I need?' The answer has always been somewhat 'clipped' purely because of the space availability issues both in the magazine and on the message board, so something a little more detailed was required. Although the Mini suspension was designed around the use of 10-inch wheels with cross-ply tyres, a quick dash through history reveals that fitment of these bigger wheel sizes isn't a recent, 'modern' application.

Wheels & tyres - Problems with 12-inch wheels rubbing

Having applied Hi-Los and some smart 165/60/12 profile tyre shod12 x 5-inch ally rims, discussions get around to a subject that has cropped up a zillion times in the Knowledge, at shows, my e-mail address, etc. - just why does this combination cause the tyre to hit the front arch?

To be more exact - why does the tyre just rub, twang the plastic arch off, or foul the arch to the point of bending it? Even if the genuine, original fitment 'Cooper' alloy 12-inch rims are used with the 165/60/12 tyres? Well, it's all a question of alignment - either subframe to body or suspension to subframe. When trying to source/cure the problem, many folk have discovered that shim plates have been used between the front panel to subframe teardrop mounting and the subframe - and wonder if the car has been in an accident and been 'fudged', so could be causing the problem.

C-AJJ4004 FRONT ANTI-ROLL BAR FITTING INSTRUCTIONS

FOR USE WITH STANDARD TIE BARS ONLY

This bar has been developed to complement those road cars fitted with post 1990 rubber springs. Being the softest compou

C-AJJ4006 ADJUSTABLE FRONT RACE ANTI-ROLL BAR

Instruction Sheet (Please read in full before installing anti-roll bar)

The mounting blocks are to be fixed at each end of the bar under the front of the subframe where there is a double thickness of metal close to the forward tie-bar brackets. Loosely assemble the blocks to the bar, one positioned between the locating rings - offer the bar up to the lower front edge of the front subframe.

C-AJJ4008 ADJUSTABLE REAR ANTI-ROLL BAR FITTING INSTRUCTIONS

Jack rear of car up, and place securely on axle stands, positioned to allow maximum access to rear subframe/rear radius arms area. Remove rear exhaust hanger to exhaust clamp or un-hook rubber loop on late type cars. Using suitable saw, cut off centralising tab from bottom center of subframe rear cross member. Remove rear wheels and brake drums. Remove upper most and rear most brake back plate to radius arm nuts and bolts.

C-AJJ4024 Brake Line conversion kit

This pipe kit is for converting Metro 4 pot callipers with dual feed pipes to a single feed as used on minis.

It is necessary however, to check that this is permitted by the legislation in the country in which the vehicle is to used. To ensure maximum...

Mini Production dates

We have tried to get together as complete list as possible to show all the models made from 1985 onwards, hopefully this will help identify those cars that have been modified over the years. If you have any information that you know is correct or anything that you think is not right please let us know.

Historical Article - Nov 1991 - Richard Mansfield's Twini Mini

Our customers car is a 1962 Austin Mini, which originally cost £250.00 and now looks absolutely standard and truly immaculate. Only when you look inside do you realise it is a car with a difference. Richard has already restored two Coopers to a very high standard and his criterior on the Twini was to use as many secondhand production car parts as possible to keep the cost down.

Historical Article - Nov 1991 - Richard Mansfield's Twini Mini

Our customers car is a 1962 Austin Mini, which originally cost £250.00 and now looks absolutely standard and truly immaculate. Only when you look inside do you realise it is a car with a difference. Richard has already restored two Coopers to a very high standard and his criterior on the Twini was to use as many secondhand production car parts as possible to keep the cost down.